SILTMAX TYPE I DOT
For use in inland waterways, the SiltMax Type I DOT Turbidity Curtain (Specifications) is specifically manufactured to meet and exceed U.S. Department of Transportation (DOT) and other regulatory requirements for silt control in Type I calm conditions. SiltMax Type I DOT is offered with impermeable and permeable options.View DOT requirements by state.
SiltMax Type I DOT is our most popular calm water silt curtain and is always in stock. For calm water conditions this Type I DOT silt barrier makes an excellent choice for silt and sediment control and meets regulatory and inspection requirements. SiltMax Type I is designed specifically for silt control in road-side ditches, canals, small ponds, and lakes. This curtain delivers high performance with a low cost.
Depths other than 5 ft are available by request and are available in a few days. Contact us for pricing and availability.
SILTMAX TYPE I DOT PHOTOS
SILTMAX TYPE I DOT VIDEO
SiltMax Type 1 DOT Specifications
Fabric: | 18 oz. Vinyl Laminated Fabric |
Float Size: | 6 inch / 15 cm Square EPS Marine Quality |
Net Buoyancy: | 6 inch / 15 cm - 13 lb/ft / 19.2 kg/m |
Load Components: | 5,000 lb Galv. Steel Chain |
Ballast: | 0.72 lb per foot Galv. Chain |
Depth: | 5ft / 1.5 m (custom depths available) |
Length: | 100 ft / 30 m or 50 ft / 15 m |
TURBIDITY CURTAIN QUESTIONNAIRE
In order that we may recommend the best Turbidity Curtain for your project, please provide the following information. We have included some questions that will help us better understand your needs. Please answer as many as possible. If the flow rate is high, Elastec can provide modeling data to determine anchor spacing and feasibility of systems.